JETFlex® CM0981430 Green Water Reducible Polyurethane Aircraft Interior Finish Coating – Gallon Can — Professional Grade Water Reducible Polyurethane Aircraft Interior Finish Coating

The JETFlex® CM0981430 Green Water Reducible Polyurethane Aircraft Interior Finish Coating – Gallon Can is a high-performance water reducible polyurethane aircraft interior finish coating manufactured by JETFlex and identified by part number CM0981430GA. Engineered to meet applicable aerospace specifications and OEM requirements, this product is trusted by aviation MRO shops, aircraft interior refinishing facilities, and defense contractors worldwide for its consistent performance and specification compliance.

Available in a convenient Gallon Can package and finished in Green, this water reducible polyurethane topcoat is engineered to meet the demanding requirements of commercial and military aircraft interior refinishing. Its water reducible formula provides low VOC emissions and reduced environmental impact while maintaining the high-performance properties required by leading aerospace OEMs and airlines. The coating offers excellent hiding power, a smooth application finish, and outstanding color uniformity across large panel areas.

Once cured, the Green finish resists cracking, chipping, peeling, and chemical attack from common aircraft cabin cleaning agents, beverages, and maintenance fluids. Its flexibility accommodates the thermal cycling and mechanical stresses experienced in service — including vibration, pressure differentials, and temperature extremes encountered during flight operations. Adhesion to aluminum panels, composites, fiberglass, and pre-primed substrates is excellent when applied over a properly prepared surface.

Application should be performed using properly maintained spray equipment following applicable surface preparation procedures. Surfaces must be clean, dry, and free of contaminants before application. Use of a compatible aerospace-grade primer is recommended for optimal adhesion. Follow all mixing ratios, pot life limitations, spray parameters, and cure schedules specified in the manufacturer’s product data sheet for best results.

The JETFlex CM0981430 in Gallon Can is an ideal coating solution for professionals who demand specification-compliant, durable, and aesthetically consistent results on aircraft interior surfaces. Contact us for volume pricing, availability, safety data sheets, and technical documentation to support your project requirements.

Product Specification

Technical Information

This water reducible polyurethane aircraft interior finish coating is formulated to comply with applicable Boeing (BAC), Federal Standard (FS), or OEM specifications as referenced in the product name (See Product Data Sheet). It is designed for spray application using HVLP or conventional spray guns over properly primed and prepared aerospace-grade substrates. Water reducible formulations should be thinned only with manufacturer-approved reducers. Pot life, dry-to-touch, dry-to-recoat, and full cure times vary with ambient temperature and humidity — always consult the product data sheet (PDS) before application. Store in a cool, dry location between 40°F–90°F (4°C–32°C), away from direct sunlight and ignition sources. Shelf life is typically 12 months from date of manufacture in original sealed containers. Full SDS and PDS available upon request.

Frequently Asked Questions

Q1: What surfaces is the JETFlex® CM0981430 Green Water Reducible Polyurethane Aircraft Interior Finish Coating – Gallon Can suitable for?
A: This coating is designed for application on aircraft interior surfaces including aluminum alloy panels, fiberglass composites, plastic substrates, and pre-primed surfaces commonly found in commercial and military aircraft cabins, galleys, lavatories, and crew rest compartments.

Q2: Does the JETFlex CM0981430 meet aerospace specifications?
A: Yes. This product is formulated to comply with See Product Data Sheet specifications. For compliance documentation, certificate of conformance, or TDS/SDS, please contact us and we will provide the appropriate technical documentation.

Q3: How should I apply the JETFlex® CM0981430 Green Water Reducible Polyurethane Aircraft Interior Finish Coating – Gallon Can?
A: Apply using a calibrated HVLP spray gun over clean, dry, and properly primed substrates. Follow the manufacturer’s PDS for mixing instructions (if multi-component), spray parameters, film thickness targets, pot life, and cure schedules. Ensure adequate ventilation and appropriate PPE during application.

Q4: Is this coating water reducible, and what thinner should I use?
A: Yes, this is a water reducible polyurethane formulation. Thin only with manufacturer-approved water reducible thinners to maintain performance properties and VOC compliance. Do not use solvent-based thinners as this may compromise coating performance and VOC compliance.

Q5: Can I order the JETFlex® CM0981430 Green Water Reducible Polyurethane Aircraft Interior Finish Coating – Gallon Can in larger quantities or different sizes?
A: Yes. While this listing is for the Gallon Can format, additional sizes and bulk quantities may be available. Contact us for volume pricing, lead times, and availability to support your aircraft maintenance or production schedule.