LPS Electro Clear CFC-Free Contact Cleaner – 11 oz Aerosol for Aerospace Electronics
LPS Electro Clear is a CFC-free, fast-evaporating contact cleaner for aerospace electronics, avionics, circuit boards, connectors, switches, relays, and electrical contacts where contamination from flux residue, oils, moisture, and dust reduces electrical performance and reliability. The CFC-free formulation meets modern environmental regulations while delivering the rapid evaporation and zero-residue performance essential for cleaning sensitive electronic components without damage.
Fast evaporation is a critical property of contact cleaners — the solvent must dissolve and carry away contamination and then evaporate completely before the component returns to service, leaving a perfectly clean, dry surface with no conductive or insulating residue that could interfere with the electrical performance of contacts, connectors, or circuit board traces. LPS Electro Clear’s rapid evaporation rate makes it suitable for use on energized electronic assemblies as well as powered-down components.
The 11 oz aerosol can provides a practical supply for avionics bench technicians, line maintenance electricians, and aircraft electronic maintenance operations where regular contact cleaning is performed on connectors, relays, switches, and PCB assemblies during troubleshooting and scheduled inspection events.
| Attribute | Detail |
|---|---|
| MPN | LPS03116 |
| Brand | LPS |
| Product | LPS Electro Clear CFC-Free |
| Color | Clear |
| Type | CFC-Free Fast-Evaporating Contact Cleaner |
| Size | 11 oz Aerosol Can |
| Residue | Zero Residue After Evaporation |
| Substrates | Electronics, PCBs, Connectors, Contacts, Relays |
| Evaporation | Fast — Suitable for Sensitive Components |
| Industry | Aerospace, Avionics, Electronics, MRO |
Technical Information
LPS Electro Clear CFC-Free uses a blend of high-purity solvents selected for rapid evaporation rate, excellent solvency for common electronic contamination types (flux, oils, fingerprints, moisture), and compatibility with plastics, elastomers, and conformal coatings encountered in aerospace electronic assemblies. The CFC-free formulation replaces the ozone-depleting CFC propellants and solvents of earlier contact cleaner generations with HFC, HFO, or hydrocarbon alternatives that provide similar performance without environmental impact.
The aerosol delivery system of Electro Clear provides a controllable, directional spray that can reach into connector cavities, under component bodies on PCBs, and into switch mechanism chambers that would be inaccessible to brush or swab cleaning methods. The pressurized spray also provides a flushing action that dislodges loose particulate contamination from mechanical features as well as dissolving film contamination from the solvent.
Allow complete evaporation of the contact cleaner before returning the cleaned component to service. While fast-evaporating formulas typically dry within seconds at room temperature, confined spaces in connector bodies or complex mechanical assemblies may require additional evaporation time before reconnecting or energizing the cleaned circuit.
Why Choose?
- ✅ CFC-Free Formula — Environmentally compliant contact cleaning
- ✅ Fast Evaporation — Zero residue for sensitive electronics
- ✅ Aerosol Precision — Reaches into connectors and assemblies
- ✅ Broad Compatibility — Safe on plastics, elastomers, and PCBs
- ✅ LPS Trusted Brand — Professional aerospace MRO cleaning product
Applications
LPS Electro Clear is used for cleaning avionics connectors, aircraft electrical contacts, PCB assemblies, switches and relays, potentiometers, and electronic components during aerospace MRO maintenance, troubleshooting, and inspection operations.
Frequently Asked Questions
Q: What is LPS Electro Clear?
A: LPS Electro Clear is a CFC-free, fast-evaporating contact cleaner for aerospace electronics — dissolving and removing flux, oils, and contamination from connectors, PCBs, and contacts without leaving residue.
Q: MPN for LPS Electro Clear 11oz?
A: MPN is LPS03116.
Q: Is LPS Electro Clear safe on plastic components?
A: Yes. Electro Clear is formulated for compatibility with common electronics plastics and elastomers. Verify compatibility with specific exotic plastics or conformal coating types before full-area application.
Q: Does Electro Clear leave residue?
A: No. LPS Electro Clear is a zero-residue formula — it evaporates completely, leaving a clean, dry surface with no conductive or insulating film remaining.
Q: Can it be used on energized equipment?
A: Fast-evaporating contact cleaners are often used on energized equipment. Follow LPS product safety data sheet and your facility’s electrical safety procedures for use on live circuits.
Reviews
There are no reviews yet.