Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can — Professional Grade Solid Film Lubricant

The Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can is a high-performance solid film lubricant manufactured by Sandstrom and identified by part number DFL-E61B-G28-AA2. Engineered for professional use in aerospace MRO, aviation maintenance, and industrial lubrication applications, this product deposits a dry solid film lubricant that reduces friction and wear on aerospace components, meeting MIL specification requirements for solid film lubrication. It is designed for use on aerospace fasteners, actuators, sliding surfaces, threaded components, and mechanisms operating under high load, vacuum, or extreme temperature conditions where liquid lubricants are not suitable, and is compatible with metal aerospace components including aluminum, steel, titanium, and specialty alloys.

This product is formulated and tested to comply with MIL-PRF-46147 Type I Form 2 / MIL-23558 Type II specification requirements. Available in 16 oz Aerosol Can format, the Sandstrom 28A delivers consistent lubrication performance across the demanding temperature, pressure, and chemical exposure conditions encountered in aerospace and industrial service. Its formulation provides a stable lubricating film that reduces friction and wear, protects mating surfaces, and extends the service life of lubricated components.

The Sandstrom 28A is engineered to maintain its lubricating properties throughout the service interval without significant migration, evaporation, or degradation. This makes it particularly well-suited for applications where relubrication intervals are long, access is difficult, or component reliability is critical. Using a specification-compliant lubricant ensures that maintenance procedures meet OEM and regulatory requirements for the systems being serviced.

Shake well before use. Apply by spraying onto the surface from the recommended distance. Allow to penetrate or dry as appropriate for the product type before assembly or operation. Avoid contamination of the lubricant container by using clean applicators. Store in a cool, dry location away from direct sunlight and extreme temperatures. Wear appropriate PPE including gloves and eye protection when handling lubricants. Refer to the full SDS for complete safety, handling, and disposal information.

Whether you are lubricating aerospace bearings, o-rings and seals, oxygen system components, precision mechanisms, or industrial machinery, the Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can provides the specification-grade performance and reliability your operation requires. Order the 16 oz Aerosol Can today or contact us for volume pricing, technical data sheets, and availability.

Product Specification

Technical Information

This product is formulated and tested to comply with MIL-PRF-46147 Type I Form 2 / MIL-23558 Type II specification requirements. This lubricant is a ready-to-use formulation requiring no dilution or mixing unless otherwise specified. Apply by aerosol spray — shake well before use, keep away from heat and open flames, and do not puncture or incinerate the container. Storage: keep in a cool, dry location between 40°F–90°F (4°C–32°C), away from direct sunlight and freezing temperatures. Shelf life is typically 2–5 years from date of manufacture in original sealed containers, depending on product type. Full Safety Data Sheet (SDS) and Product Data Sheet (PDS) are available upon request. Dispose of waste lubricant per applicable federal, state, and local environmental regulations.

Frequently Asked Questions

Q1: What surfaces and components is the Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can compatible with?
A: This solid film lubricant is compatible with metal aerospace components including aluminum, steel, titanium, and specialty alloys. Always verify compatibility with specific substrate materials and system fluids by consulting the product data sheet or contacting us for technical support before application in critical systems.

Q2: Does the Sandstrom 28A comply with aerospace or military specifications?
A: Yes. This product is formulated to comply with MIL-PRF-46147 Type I Form 2 / MIL-23558 Type II specification requirements. For certificates of conformance or official compliance documentation, please contact us.

Q3: How should I apply the Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can?
A: Shake well before use. Apply by spraying onto the surface from the recommended distance. Allow to penetrate or dry as appropriate for the product type before assembly or operation. Always follow the manufacturer’s product data sheet for specific application quantities, methods, and any required surface preparation or cleaning prior to lubrication.

Q4: What are the storage and shelf life requirements for this lubricant?
A: Store in a cool, dry location between 40°F–90°F (4°C–32°C) away from direct sunlight, heat sources, and freezing temperatures. Shelf life is typically 2–5 years from manufacture date in original sealed containers. Check the container label for product-specific expiration information.

Q5: Can I order the Sandstrom 28A Gray MIL-PRF-46147 Type I, Form 2 / MIL-23558 Type II Spec Solid Film Lubricant – 16 oz Aerosol Can in bulk or larger quantities?
A: Yes. While this listing covers the 16 oz Aerosol Can format, additional sizes and bulk quantities may be available. Contact us for volume pricing, lead times, and availability to support your maintenance program or production requirements.