Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can — Professional Grade Waterborne PTFE Heat Cure Dry Film Lubricant

The Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can is a high-performance waterborne ptfe heat cure dry film lubricant manufactured by Sandstrom and identified by part number DFL-E859-826-QQ1. Engineered for aerospace MRO, defense maintenance, and industrial lubrication applications, this product waterborne PTFE formula reduces environmental and health impact compared to solvent-based alternatives while providing high-performance heat-cured dry film lubrication. It is designed for use on aerospace fasteners, mechanisms, weapon systems, and sliding surfaces requiring a waterborne, PTFE-enhanced heat-cure dry film lubricant with low environmental impact, and is compatible with metal aerospace and defense components including aluminum, steel, titanium, and specialty alloys requiring PTFE-modified heat-cure solid film lubrication.

This lubricant is engineered to meet the exacting performance demands of aerospace, defense, and industrial dry film lubrication applications. Available in Quart Can format, the Sandstrom Poxylube 859 delivers consistent, reliable dry film lubrication performance under the demanding temperature ranges, load conditions, and environmental exposure encountered in aerospace and defense service. Its formulation produces a stable, adherent lubricating film that minimizes friction and wear, prevents galling and corrosion, and extends the service life of coated components throughout the maintenance interval.

Selecting a specification-compliant dry film lubricant is critical in aerospace and defense maintenance to ensure that lubricated components perform reliably under the mechanical and environmental stresses of service. The Sandstrom Poxylube 859 provides the OEM and specification-grade performance required by quality management systems, airworthiness regulations, and defense procurement standards. Using the correct lubricant ensures traceability, compliance, and reliable operation of the lubricated system.

Apply to clean, dry, properly prepared surfaces by brush, spray, or dip method. After application, cure following the manufacturer’s specified temperature profile and time to achieve full film development and specification-compliant performance. Do not place into service before full cure is achieved. Ensure all surfaces are thoroughly cleaned, degreased, and free of contamination before application to achieve maximum film adhesion and performance. Wear appropriate PPE including gloves and eye protection. Store in a cool, dry, well-ventilated location between 40°F–90°F (4°C–32°C). Keep containers tightly sealed. Shelf life may be sensitive to temperature — check label for storage requirements. Refer to the full SDS and PDS for complete safety, handling, and disposal information.

Whether you are lubricating aerospace fasteners, defense weapon system components, precision mechanisms, or industrial sliding surfaces, the Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can provides the specification-grade dry film lubrication your program requires. Contact us for volume pricing, technical data sheets, certificates of conformance, and availability.

Product Specification

Technical Information

This lubricant is engineered to meet the exacting performance demands of aerospace, defense, and industrial dry film lubrication applications. Heat-cure products require application to properly prepared surfaces followed by a controlled cure cycle at the manufacturer-specified temperature and time to achieve full film development and specification-compliant performance. Do not place components into service before full cure is verified. Store in a cool, dry, well-ventilated location between 40°F–90°F (4°C–32°C). Keep containers tightly sealed. Shelf life may be sensitive to temperature — check label for storage requirements. Shelf life is typically 1–3 years in original sealed containers from date of manufacture. Full Safety Data Sheet (SDS) and Product Data Sheet (PDS) are available upon request.

Frequently Asked Questions

Q1: What surfaces and components is the Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can compatible with?
A: This waterborne ptfe heat cure dry film lubricant is compatible with metal aerospace and defense components including aluminum, steel, titanium, and specialty alloys requiring PTFE-modified heat-cure solid film lubrication. Always verify compatibility with specific materials and system requirements by consulting the product data sheet or contacting our technical team before applying to critical aerospace or defense components.

Q2: Does the Sandstrom Poxylube 859 comply with aerospace or military specifications?
A: This product is engineered to meet the performance requirements of aerospace and industrial dry film lubrication applications. Contact us for full technical data sheets and application guidance.

Q3: How should I apply the Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can?
A: Apply to clean, dry, properly prepared surfaces by brush, spray, or dip method. After application, cure following the manufacturer’s specified temperature profile and time to achieve full film development and specification-compliant performance. Do not place into service before full cure is achieved. Always follow the manufacturer’s product data sheet for film thickness targets, application method requirements, surface preparation standards, and cure schedule specifications for optimal performance and specification compliance.

Q4: What are the storage and shelf life requirements for this lubricant?
A: Store in a cool, dry, well-ventilated location between 40°F–90°F (4°C–32°C). Keep containers tightly sealed. Shelf life may be sensitive to temperature — check label for storage requirements. Shelf life is typically 1–3 years from date of manufacture in original sealed containers. Always verify with the container label or SDS for product-specific storage requirements and expiry dates before use.

Q5: Can I order the Sandstrom Poxylube® #859 Jet Black Waterborne PTFE Heat Cure Dry Film Lubricant – Quart Can in different sizes or bulk quantities?
A: Yes. While this listing covers the Quart Can format, additional sizes, color variants, and bulk quantities may be available for this product. Contact us for volume pricing, lead times, availability, and to confirm which sizes and variants best support your aerospace MRO or defense maintenance program.