TE Connectivity S1006 Two-Part Polyamide Epoxy Adhesive – 10 × 5g Sachets for Field Repairs
TE Connectivity S1006 is a two-component polyamide-cured epoxy adhesive packaged in single-use 5-gram sachets — 10 per kit — providing the ultimate in portability, convenience, and material control for field aerospace repairs, avionics bonding, and maintenance applications where carrying large adhesive packages is impractical and where using exactly the right amount of adhesive without waste is important.
Each sachet contains a pre-measured quantity of epoxy base and hardener, eliminating the ratio measurement and mixing equipment normally required for two-component epoxy adhesives. The sachet format provides a fresh, uncontaminated adhesive dose for each use — no partially-used containers with reduced shelf life, no contamination risk from repeated opening, and no concern about mixing equipment cleanliness affecting the bond quality.
Polyamide-cured epoxy adhesives provide excellent flexibility and toughness in the cured film compared to standard amine-cured epoxies, with better peel and impact resistance that is particularly valuable for the dynamic loading experienced by electronic component bonds in aircraft avionics systems.
| Attribute | Detail |
|---|---|
| Manufacturer Part Number (MPN) | S1006-KIT-A |
| Brand | TE Connectivity |
| Product Name | S1006 Two-Part Polyamide Epoxy |
| Color | Amber / Gray |
| Product Type | Two-Component Polyamide-Cured Epoxy Adhesive |
| Package Format | Single-Use Sachets |
| Package Size | 10 Sachets × 5 Grams Each |
| Substrate Compatibility | Metal, Composite, Plastic, Ceramic |
| Application Method | Knead and Open Sachet — Mix and Apply |
| Industry Use | Aerospace, Electronics, Defense, Field MRO |
Technical Information
TE Connectivity S1006 uses a polyamide hardener system that reacts with the bisphenol-A epoxy resin base to produce a crosslinked polyamide-epoxy network with greater chain mobility and energy absorption capacity than standard aliphatic amine-cured epoxies. The result is a cured adhesive with improved flexibility, elongation at break, and impact resistance — particularly important for avionics and electronics bonding applications where the adhesive joint must withstand the vibration and shock loading of aircraft operation without brittle fracture.
The sachet packaging isolates the two components in separate compartments until the sachet is kneaded to break the internal barrier and mix the components together. Once the components are mixed by kneading, the sachet is opened and the mixed adhesive is dispensed directly to the bonding surface. The 5-gram sachet size provides enough adhesive for typical small component bonding and field repair operations without excess material waste.
Cure of S1006 proceeds at room temperature, with handling strength developing over several hours. Elevated temperature cure accelerates strength development. The full cure schedule and performance properties are detailed in the TE Connectivity S1006 technical data sheet, which should be consulted for your specific application requirements and cure conditions.
Why Choose TE Connectivity S1006 Sachets?
- ✅ Single-Use Sachets — Fresh adhesive for every repair, no contamination risk
- ✅ Pre-Measured — No ratio weighing required, correct mix guaranteed
- ✅ Portable — 10-sachet kit ideal for field maintenance and travel toolkits
- ✅ Polyamide Toughness — Flexible, impact-resistant cure for avionics bonding
- ✅ TE Connectivity Quality — Trusted aerospace and electronics connectivity brand
Applications
S1006 sachets are used for avionics component bonding, field structural repair, connector potting, electronic assembly in aircraft, and general aerospace MRO repair operations where portability and single-use freshness are required.
Frequently Asked Questions
Q: What is TE Connectivity S1006 used for?
A: S1006 is a polyamide-cured epoxy adhesive in sachet format used for avionics bonding, field aerospace repairs, electronic component attachment, and MRO maintenance where portable, single-use pre-measured epoxy is required.
Q: What is the MPN for TE Connectivity S1006 10-sachet kit?
A: MPN is S1006-KIT-A.
Q: How many sachets are in the S1006-KIT-A?
A: 10 sachets of 5 grams each, providing 50 grams total of two-part polyamide epoxy adhesive.
Q: How do I use the S1006 sachet?
A: Knead the sachet to break the internal separator and mix the two components, then open the sachet and apply the mixed adhesive to the bonding surface. Follow the TE Connectivity TDS for kneading time and cure schedule.
Q: Why is polyamide-cured epoxy better for avionics?
A: Polyamide-cured epoxies provide greater flexibility, peel strength, and impact resistance than standard amine-cured epoxies — important for electronic component bonds that must survive aircraft vibration and shock loading.
Reviews
There are no reviews yet.